The fully automatic water softener (fully automatic sodium ion exchanger) produced by our company can be configured according to the needs of the user: single tank, double tank, and multi-tank combinations. The control method is divided into time type and flow type to control regeneration and water production. From .tons/hour to tons/hour. / Working principle of ion exchanger and fully automatic water softener: / The hardness of water is mainly composed of cations: calcium () and magnesium ions. When raw water containing hardness passes through the resin layer of the exchanger, the calcium and magnesium ions in the water are adsorbed by the resin, and sodium ions are released at the same time. The water flowing out of the exchanger is softened water with the hardness ions removed. When the resin adsorbing calcium and magnesium ions reaches a certain level, it loses its exchange ability. At this time, the water softener automatically regenerates the failed resin according to a predetermined program. Use a higher concentration of sodium chloride solution to pass through the resin to restore the failed resin to sodium-type resin. /Application scope: /Industrial boilers, central air conditioners, heat exchangers, hotels and restaurants, food and chemical industry, laundry, printing and dyeing, medical and health industries. /Main Features/, High degree of full automation, stable water supply conditions, and long service life. The entire process runs automatically, requiring only manual addition of salt regularly. /, high efficiency, low energy consumption, low operating costs. Due to the reasonable overall design of the water softener, the exchange capacity of the resin is fully utilized. The energy consumption indicators of the equipment itself are significantly lower than those of ordinary softened water equipment, and the automatic control equipment does not require full-time operators, which brings a lot of convenience to users and produces good benefits. /Water consumption: Water production /Salt consumption: Approximately - grams of salt are needed to regenerate one liter of resin. The specific salt consumption needs to be determined according to the water quality index of the user's raw water. /Power consumption: -, since there is no need for a salt pump and an ordinary lighting power supply is used, its power consumption is only that of an ordinary water softener/The equipment has a compact structure and a small footprint. It does not require a special equipment foundation and is placed directly on a flat cement floor. Just go up. /. It is simple to use, easy to install, debug, and operate. The performance of the control components is stable, which can relieve users' worries. /, Corrosion-resistant, anti-pollution, lead-free brass or material control valve body, glass rigid exchange tank, material salt box, these are enough to ensure that the equipment is corrosion-resistant, anti-pollution, non-toxic, odorless and non-toxic. excellent performance. /Product Structure/Full-automatic water softening equipment mainly consists of three parts:/, Automatic control device: According to user needs, fully automatic controllers with two control modes, time control and flow control, can be configured, and optionally equipped with Runxin, Fleck, etc. For control valves, hydraulic, pneumatic, and electric multi-valve control systems can also be used. /. Tank part: According to user requirements, the exchange tank and salt tank can be made of fiberglass, carbon steel, rubber-lined, stainless steel and other materials. /Accessories part: including water distribution device, salt absorption device, pipeline accessories, etc. /Regeneration program/, water supply: Untreated water passes through the resin layer, exchange reaction occurs, and soft water is produced. /, Backwash: Water enters from the lower part of the resin layer, loosens the resin, and removes fine debris. /Salt regeneration: Use higher concentration salt water () to flow through the resin to restore the failed resin to sodium-type usable resin. /. Rinse: According to the process of water supply, the water passes through the resin to rinse away the excess salt solution and regenerate the exchanged calcium and magnesium ions. /. Water supply: Inject water into the salt box to dissolve the salt particles for the next regeneration. /Control method/, Time control: Suitable for places where the daily water supply is relatively stable. When the regeneration time set by the user is reached, the regeneration process will be automatically started. The regeneration time can be set at the low peak of water consumption according to the user's needs. This control method has the characteristics of simple control method, low price and simple operation. This system is mainly used in situations where the hardness is low, the water consumption is stable (the fluctuation of water consumption does not exceed), the water output requirements are not high, and the water consumption is small. /. Flow control: The operation of this equipment is measured by a flow meter. When the water volume set value is reached, regeneration is automatically started. The set value of water volume is calculated based on the total working exchange equivalent value of the exchanger and the incoming water hardness equivalent value. The system has stable and reliable water output and is equipped with a memory function. There is no need to re-set the values after a power outage. /Technical indicators/, Pressure range: .—., to ./, Inlet water quality: In line with the standards of "B/3-Technical Conditions for Automatic Control of Sodium Ion Exchanger"/Outlet water hardness: ≤.3, Raw water temperature: -℃ /, Power supply:, Power: —/, Water consumption: ≤/, Salt consumption:., Regeneration mode: downstream or countercurrent parameters that need to be provided by user selection/, Water production per unit hour (unit: /)/, Raw water Source and its total hardness, total alkalinity, total salt content/outlet water hardness requirements (unit: /)/, inlet water pressure (unit:), between/, daily water consumption/installation requirements:/, no need to make The equipment foundation is a flat cement floor. /. The user only needs to connect the inlet and outlet pipes of the equipment and the sewage pipes to the system according to the installation diagram. /If the inlet water pressure is too low, an automatic boosting device needs to be installed. /. Drainage ditches should be reserved within meters around the water softener. /. The water outlet of the water softener should be equipped with a water storage tank. The volume of the water storage tank must be ≥. times of the water production, and an automatic water level control device should be installed. /. Equipment pipelines should be made of pipes that are not prone to rusting, and loose pipe fittings must be installed on the pipelines to facilitate future maintenance and disassembly. /. Appropriate filtering devices must be installed on the water inlet pipeline of the equipment to prevent larger impurities from entering the valve body of the main controller and causing damage. /. If the user uses underground well water or surface water as the water source of the water softener, it is recommended that the user install a suitable fine filtration device in front of the equipment to prevent the resin from being contaminated by deep well sediment or other impurities, thereby greatly reducing the service life of the resin. .
Xuzhou softened water equipment supplier